The KitchenAid Mixer
81
![]() | Amazon Price: $67.09 List Price: $145.00 |
Amazon Price: $29.95 List Price: $65.00 | |
![]() | Amazon Price: $5.91 List Price: $9.99 |
![]() | Amazon Price: $0.50 List Price: $14.99 |
A Kitchen Workhorse
The basic design of the kitchenAid mixer has been around for decades. It does a great job of the mixing most families require of this appliance. Unlike the more popular, in the past, Sunbeam Mixmaster, the KitchenAid comes with three different beaters: a flat one for most purposes, a wire whisk type beater for whipping eggs, egg whites, and cream, and a hook for kneading dough.
What is impressive about this small appliance is how well made it is. We've had our KitchenAid K45, sort of today's Classic model, for more than thirty years, and after more than average use, there is nothing wrong with it. The plastic coating on the flat beater suffered a cut, and eventually I tore the rest of it off the beater. The original shield, a circular aluminum band about one and one half inches wide, has disappeared. Someone gave us the updated pouring shield, a white plastic model with an area for pouring in ingredients. This works well, and I have learned how to move it over the head of the mixer when I need to, and I have learned how to move it back to position without turning on the mixer which I used to do. I see that the current pouring shield comes apart. I have never used it, but it should be an improvement over what I have.
Perhaps one of the drawbacks of the KitchenAid is the need for a shield, and that the large motor head does pose a little problem when adding ingredients. And, there is no way to take off the head and use it as a portable mixer -- but given the size and weight of the head, not to mention that the planetary action of the beater movement would make holding it by hand extremely difficult -- that is not a surprise.
For years I have watched the changes in KitchenAid mixer models. I've seen a lot of different colors, finishes, changes in wattage, the soft start feature, a great idea, and the introduction of the six quart model, currently the largest KitchenAid home mixer. But, really, the K45, now the Classic, we were given thirty years ago is still available.
The customer support of KitchenAid is impressive. When I called the customer service department about ordering a new glass measuring cup for the A-9 Coffee Mill, Kitchenaid offered to send me one for free. For our mixer, I have had to replace the rubber feet. No problem, they are available.
|
|
Kitchenaid kp26m1xPM Professional 600 Stand Mixer 6 quart ALL METAL 10-SPEED
Current Bid: $299.99
|
|
|
Kitchenaid Stand Mixer Tilt ksm150psww Artisan Tilting White rk150ww Beautiful
Current Bid: $199.99
|
|
|
Kitchenaid Stand Mixer tilt 5-QT rk150wh All Metal Tilt Artisan 10 speed white
Current Bid: $199.99
|
|
|
THE BEST KITCHENAID MIXER ATTACHMENT , KITCHENAID MIXER ACCESSORY EVER !
Current Bid: $14.95
|
Uses and Attachments
What do we use our mixer for? Making cakes, both boxed and from scratch, mixing cookie dough, combining ingredients quickly as for pate choux (cream puffs), mixing meat loaf, making mashed potatoes, beating egg whites (I can't think of anything that does a better job at this task), making pie dough (this is so easy, and it took me just a few tries to master it) come to my mind quickly.
My son has the pasta roller attachment for his KitchenAid, and he says it works very well, I have the pasta plates for the food grinder, and I tried it once. I wasn't good at using that pasta attachment, and it was a lot of work. There is still a can opener attachment. I wonder who would ever buy that. We have used in the past the roto slicer, the food grinder, and the citrus squeezer attachment, but the citrus squeezer is so high up that I think it would be uncomfortable for most consumers. Another problem with the citrus squeezer is that the citrus must be pressed to the side, and not down. Years ago my parents bought the ice cream maker attachment, which was like a regular ice cream maker (I thought it might have been made by White Mountain because of the design). It made two quarts of ice cream. There is today a new type of ice cream maker that does not require ice and salt like mine did. It must be put in the freezer for fifteen hours before being used, however. We did use the dough hook, but since we have a large Cuisinart food processor, we no longer use the Kitchenaid for bread dough. For slicing and grating, the processor is better.
Current Competition and Conclusion
I've noticed that just recently major small appliance makers, such as Hamilton Beach and Atreezzi by Jenn Air, have come out with very similar competitors. I have wondered if original patents have expired that allowed others to so closely mimic KitchenAid's design. And, there is more high end mixer competition from Viking and Kenwood. These are very expensive, heavy machines. KitchenAid has a popular current tilt head model called the Artisan, with a five quart capacity bowl. Recently, KitchenAid discontinued the Accolade model which was similar in size to the Artisan, but a more rounded bowl and and more powerful motor, 475 watts, with all metal gears. The all metal gears made it stronger and louder. This model may still be available in some stores and in the refurbished line.
In spite of the competition, the longevity of the Kitchenaid has proved its design and its reliability. This is a top choice for the prolific home cook.
I'd Enjoy Reading Your Thoughts . . .Loading...
I want one of these and I can't even cook or bake, lol!
This is a fantastic piece of kit providing a great alternative to kneading dough for hours on end. Of course it takes stirring, mixing and beating in its stride. The direct drive motor provides more than enough power but respect must be given to even this machine, and it is imperative to read the instructions before use to ensure the correct speeds are selected for each task. Otherwise you will end up with your mix all over the kitchen!
Does anyone know if a Hobart #12? hub attachment meat grinder will fit the kitchenaid 5 Qt. pro. I want a metal grinder, not plastic. I compare that to driving a BMW with muddy tires.
I'm trying to find out the same thing about the Hobart #12 hub fitting a Kitchaid Mixer........I agree totally.
My cousin who lives in U.S. L.A. to be exact, gave me a HOBART KITCHENAID mixer of course its a second hand so I have no brochure, I want to learn how to move the head of that mixer, model k45. Thanks
I've had my K45 Kitchen Aid mixer for 35 years. I'm trying in vain to replace the rubber feet (5 of them). Any suggestions? V G
does anyone have a good idea about what I might sell my K45 kitchen Aid mixer with meat grinder attachment and bowl and beaters for? I'm moving and can't take everything, darn! Thanks.
Will the KitchenAid Grain Mill attachment fit on a Hobart #12 taper hub?
KitchenAid Mixers provide the users with strong performances, great designs, and outstanding results. This product is very effective to be used for mixing flours until 14 cups for any purposes. While mixing the flour, it is able to avoid splash and puff to be occurred. Great device.!







Glen Wood 5 years ago
I must agree this is a good product. My wife purchased one several years ago and has been well pleased with it's performance. My daughter even likes it for making her chocolate chocolate chocolate cookies (A quick and easy way to have teens bouncing off the walls). All and all we are well pleased with this product and would purchase other products from this company.